Specifications
Motor: 2218 1180kV Brushless Motor
ESC: 30-35A
Battery: 3s 1800 - 2200mah
Wingspan: 44.5 inches (1130.3mm)
Center of Gravity: 1-1/8 of an inch (28.5mm) from the leading edge.
Propeller: 9 x 6
ESC: 30-35A
Battery: 3s 1800 - 2200mah
Wingspan: 44.5 inches (1130.3mm)
Center of Gravity: 1-1/8 of an inch (28.5mm) from the leading edge.
Propeller: 9 x 6
Overview
For those of you who know me (Steve, the dad), I don't know how to fly these planes that we make. Well I'm going to make an effort to try and learn how to fly. I wanted to design a plane that doesn't take long to make, it's easy to build, and I don't care if I crash it. I was at a Wings Over Edgewater event and I saw Joshua Orchard flying the Sig Kadet, that is when I decided what plane I needed to build. He flew it so well and made it look like so easy to fly. I was going to make a build video for it but it is pretty easy to build. If you have some experience building foam board planes, this should be very simple. I designed the wing to come off and attach to the fuselage with rubber bands. That is also convenient for when you crash, you can easily build a new wing and replace the damaged one. Hope you enjoy this build.
Plans
| sn_kadet_8.5x11_6-18-24.pdf |
| sn_kadet_11x17_2-13-24.pdf |
| sn_kadet_20x30_2-18-24.pdf |
| sn_kadet_full_size_2-18-24.pdf |
|
|
|